|
|
Post by rcooke03 on Mar 23, 2021 18:03:03 GMT -5
I have a 2021 312vik and am having water pressure issues in the kitchen faucet. The bathroom and outside kitchen have good pressure but the kitchen is so weak it is almost unusable. It has been back ro dealer and they changed the faucet the first time, said it was plastic bits from on board tank, but are now saying pressure is normal and refuse to go any further. I am curious if any others have had this problem. Thanks
|
|
|
|
Post by WrkrBee on Mar 23, 2021 21:18:07 GMT -5
Always ask them to save any parts replaced and especially what the problem turned out to be. Did you see the plastic bits? You can tell a lot from debris. It could be plastic drill shavings, Teflon tape, PEX pieces, etc. They may have gotten all the pieces, maybe. If it happens again, then they should go further.
Not in the camper, but I found a screw in the cartridge of a new kitchen faucet that would not cut off. I've had to replace many pneumatic valves at work due to incorrectly installed Teflon tape on fittings.
|
|
|
|
Post by fotohouse65 on Apr 4, 2021 14:54:32 GMT -5
I found some saw dust that had apparently accumulated in the system, it was clogging the screen at the sprayer. I also found pex chips in the bathroom one on mine restricting it flow. They really need some quality control on the assembly line.
|
|
