|
Post by WrkrBee on May 2, 2021 13:25:04 GMT -5
Does anyone know the make of the corner showers used in the 2017 Sonic Lites? One of our upper butterfly rollers (23mm) broke due to a porosity in the pot metal casting. A part number would help. This information should be available on the Venture website, that's a BIG hint. Attachments:
|
|
|
Post by WrkrBee on May 6, 2021 9:30:54 GMT -5
Sent Venture a message Friday to find out who makes the shower doors and maybe a part number for the top butterfly roller. Still no response. Called "Customer Service" yesterday because I want to get a roller before the next trip. Went through the usual number phone menu drill down to get to the Sonic person (One plus was there was no wait). Gave him the last 8 of the VIN number. He could not, or would not, give me the maker of the shower door or a part number. He did some digging, I guess, and came back with an $80 cost. I asked if that was for a set or one roller (you can get a whole set of 8 rollers for <$16 on Amazon). I told him that was out of line, so he passed me to another department with no answer. I left a voicemail (typical name, phone number, reason) and have yet to hear from them. I found a new set (8 rollers) that should work with a little mod if needed, on Ebay, for <$10 and free shipping. I'll post the name and part number, if they work.
Note: Venture did leave a call back voicemail, but I had it fixed by then. Never received a reply from the website inquiry.
|
|
|
Post by WrkrBee on May 9, 2021 16:17:53 GMT -5
These work for less than $10 for a whole set. These are 25mm rollers vs 23mm on the original, but the track is big enough to use them. I now have 7 spare rollers. You may need to adjust the roller for the doors to meet even. ApplianPar Shower Door Rollers; Upper and Bottom Double Wheels for Bathroom Pan Glass DIY Sliding Runners; Set of 4 Ebay Vendor: livingwellinnovations UPC / ISBN number: 0759263896485 Price: US $8.57 and free shipping.Material: stainless steel, nylon; strong load-bearing capacity, ultra-quiet. Roller diameter: 25mm, Minimum Hole size in the glass: 10mm Suitable for 5mm/0.2inch or 6mm/ 0.24 inch glass doors. Used for showers massage cabins, bathtubs, small furniture fittings. Package includes: 4 x Upper rollers, 4 x Bottom rollers. The new bracket was a little darker gray, so I disassembled the new assembly and put the rollers on the old bracket. To disassemble, pop the tiny cover off. The C clip fits loosely over the screw end, remove it. Unscrew the adjusting screw from the roller.
|
|