|
|
Post by bitbangr on Oct 20, 2022 13:07:21 GMT -5
We (somewhat foolishly) bought a repaired 2015 190VRB a few months ago and have recently discovered that the back corner under the sink is basically all rotted away, framing and all. It would be super helpful to have a reference as to what should be there, as I don't trust the slap-dash repairs that were done to use as a guide.
|
|
|
|
Post by navylcdr on Oct 20, 2022 21:21:18 GMT -5
You will probably have better luck finding the prints for the rib locations on a Viking boat....
|
|
|
|
Post by bitbangr on Oct 21, 2022 10:30:44 GMT -5
You will probably have better luck finding the prints for the rib locations on a Viking boat.... I asked on FB Messenger and THEY SENT THEM TO ME!! |
|
marjim
Weekender RV’er
Retired EE, Vietnam Vet, God, Faith, Family & Flag. St. Louis area
Posts: 99
|
Post by marjim on Oct 21, 2022 20:40:47 GMT -5
I have some prints sent to me from the factory guy. Even though I didn't have issues, I did not want to randomly drill and mount a bracket for the TV.
Luckily, one of the prints showed the backing plate. Otherwise, I would like to see your set of drawings to update mine if you don't mind.
|
|
|
|
Post by earlelaine on Oct 22, 2022 9:08:06 GMT -5
My backing plate was pushed in when the lag bolts we're screwing in, the lags didn't grab the wood backing. The dealer was able to predrill the holes and put the lags bolts in and then they grabber the wood plate and pulled in in secured.
|
|
|
|
Post by WrkrBee on Oct 22, 2022 12:21:34 GMT -5
You will probably have better luck finding the prints for the rib locations on a Viking boat.... I asked on FB Messenger and THEY SENT THEM TO ME!! Ask for an electrical schematic. Anyone with prints need to post them in the appropriate forum for other owners to find. |
|
|
|
Post by WrkrBee on Oct 20, 2023 7:06:05 GMT -5
I have some prints sent to me from the factory guy. Even though I didn't have issues, I did not want to randomly drill and mount a bracket for the TV. Luckily, one of the prints showed the backing plate. Otherwise, I would like to see your set of drawings to update mine if you don't mind. Take pictures of the prints and post them on the forum. |
|
|
|
Post by WrkrBee on Oct 20, 2023 7:07:09 GMT -5
You will probably have better luck finding the prints for the rib locations on a Viking boat.... I asked on FB Messenger and THEY SENT THEM TO ME!! Take pictures of the prints and post them on the forum. |
|
